SWAT Loadout Case

$379.97

SWAT Loadout Case

The SWAT Loadout Case is the Pelican 1630 with optional MOLLE Lid Organizer with Tenax Mounting is the ideal case for your SWAT loadout as it's deep enough to hold your gear but shallow enough to fit in the trunk of your cruiser or POV.

The case pictured above belongs to a SWAT operator that serves as city PD and county SWAT.  He also had install our MOLLE Lid Organizer to maximize the use of space and keep ultra organized.

We have made this case with the MOLLE Lid Organizer with Tanex Mounting for many Special Operations commands, EOD and Bomb Techs and Paramedics. 

SWAT Loadout Case Overview:

  • RETRACTABLE EXTENSION HANDLE
  • 4 STRONG POLYURETHANE WHEELS WITH STAINLESS STEEL BEARINGS (WHEEL DIAMETER IS 5.3CM)
  • Easy open Double Throw latches
  • Open cell core with solid wall design - strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Fold down handles
  • Stainless steel padlock protectors
  • 3 level Pick N Pluck™ with convoluted lid foam
  • Stackable
  • Reinforced corners
  • Lifetime Guarantee of Excellence
  • WATERTIGHT, CRUSHPROOF, AND DUSTPROOF
  • Optional MOLLE Lid Organizer

 

How our MOLLE Lid Organizer with Tanex Mounting Works:

On the inside of the Pelican 1630 lid, there are 5 tabs that protrude.  These are designed to accept the small screws that hold the Pelican brand lid organizer.  Tanex is mounting hardware that is made of two pieces, the stem and the button.  The stem is screwed into the tab and the button slips over the stem locking the button in place.  To release the mount, just lift the button and pull.

When we custom cut your panel, our CNC machine also cuts the precise location to mount the button exactly to match the position of the stem.  The Tenax system eliminates the possibility of extreme heat causing a velcro mount to separate from the lid.  Tenax mounts make it very easy to remove the panel to alter your pouch positions. 

When you add your MOLLE Lid Organizer, you get to pick the color of the organizer and even the color of the Velcro Loop strip across the top which holds your command and morale patches. 

INTERIOR (L x W x D)

27.7" x 20.98" x 15.5" (70.3 x 53.3 x 39.4 cm) 

 

EXTERIOR (L x W x D)

31.28" x 24.21" x 17.48" (79.4 x 61.5 x 44.4 cm) 

 

BODY: Polypropylene
FOAM: 1.3 lb Polyurethane
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile

 

Pelican SWAT Case SPECS:

 

INTERIOR (L x W x D)

27.7" x 20.98" x 15.5" (70.3 x 53.3 x 39.4 cm)

 

 

EXTERIOR (L x W x D)

31.28" x 24.21" x 17.48" (79.4 x 61.5 x 44.4 cm)

 

 

INTERIOR CUBIC VOLUME:

5.21 cubic feet (147.61 cubic decimeter)

 

This case has internal wheel and/or handle wells that will reduce usable area, please review for each application.

 

LID DEPTH:

3.25" (8.3 cm)

 

 

BOTTOM DEPTH:

12.14" (30.8 cm)

 

 

TOTAL DEPTH:

15.5" (39.4 cm)

 

 

WEIGHT WITH FOAM:

36 lbs (16.33 kg) 

 

 

WEIGHT W/O FOAM:

31 lbs (14.06 kg) 

 

 

BUOYANCY:

350 lbs (158.76 kg)

 

 

RANGE TEMPERATURE

-40 / 210° F (-40 / 99° C)

 

CERTIFICATES

• IP67 (1 meter submersion for 30 minutes)
• Def Stan 81-41/STANAG 4280

SKU: P1630
Add MOLLE Lid Organizer with Tanex Mounting

Reviews

There are no reviews for this product yet.
leave a review