Please Use "Add To Quote" for Pricing
When you fire a 12-gauge disrupter from a robot, the real problem isn’t the shot—it’s the recoil that beats your robot to death. One bad hit can bend an arm, crack a mount, shake loose sensors, or put the whole platform out of service. It slows missions, wrecks budgets, and forces your team to work without the tool you rely on most.
The Vadum Recoil Mitigation System stops that from happening. It gives your robot a smarter, safer way to fire without taking damage. Instead of the recoil slamming straight into the robot, the system uses a sliding chassis on a rail to manage the force. The hydraulic absorber takes the energy and slows everything down in a smooth, controlled motion. No shock load. No violent hit. No debris. No counter-shot mass. Just a clean shot that protects your robot every time.
Setup is simple. Clamp your disrupter into the mount using the included wrenches and brass sleeve. It works with popular tools like PAN and RD24. Mount it flat, make sure your rail path is clear, and you’re ready. The system reduces recoil by up to forty-to-one, which means your robot stays mission-ready instead of getting hammered to pieces.
The absorber comes preset from the factory, but you can tune it for your exact robot and load. Different robots, attachments, and cartridges all behave differently. You can dial it in through test shots until the system uses the full recoil stroke without overloading the platform. Once you lock the setting, your robot gets consistent protection shot after shot. Before each firing, reset the chassis forward and you’re ready to go.
This system is built for real EOD work—bomb squads, military EOD, and anyone who trusts a robot to keep distance between them and a suspect device. It’s built for teams that can’t afford downtime, broken hardware, or slow missions. It’s built to protect the expensive equipment you’ve fought to get and need to keep running.
Your robot is too valuable to risk on uncontrolled recoil. Every team knows what one bad shot can cost. The Vadum Recoil Mitigation System gives you the confidence to take the shot without destroying your platform. It keeps the robot stable, keeps your tools working, and keeps your mission moving forward.
If you want the safest, cleanest, most reliable way to fire a disrupter from your robot, get this system through EOD Gear.
Request a Quote now.
Get the price. Get the gear. Keep your robot alive and ready for the next mission.
