Shock Tube Saver Kit


Please Use "Add to Quote"

Shock Tube Saver Kit

Use the Shock Tube Saver Kit to save big and give you more money to spend on ammo, explosives and other kit that you need downrange.

Reusing firing wire is much more cost effective than shock tube.  Do the math and save.  Get your quote today!


Shock Tube Saver Kit SPECS:


Dimensions (LxWxH): Initiator: 5.7" x 3.7" x 2.0"
Power Pack: 5.2" x 2.44" x 2.28"
Weight: Initiator: 1.1 lbs.
Power Pack: 0.4 lbs. (including batteries)
Power Supply: Three standard 9-Volt alkaline batteries.
Maximum Range: 6,000 feet using 16 gauge duplex lead line.
3,900 feet using 18 gauge duplex lead line.
2,400 feet using 20 gauge duplex lead line.
1,500 feet using 22 gauge duplex lead line.
970 feet using 24 gauge duplex lead line.
600 feet using 26 gauge duplex lead line.
385 feet using 28 gauge duplex lead line.
Shock Tube Tip: Fires military, thick walled, and standard commercial shock tube.
Environmentally Sealed: Power pack and downrange initiator are water resistant.
Safety: Downrange initiator will not fire until fully charged to design voltage. Power pack outputs are caged (shorted) until unit is fired. Downrange initiator automatically discharges safely if FIRE button is released. Single button fire control with shrouded switch to prevent inadvertent actuation.
Fast Charge: 2~3 seconds
Long Battery Life: Provides over 1000 charge-fire cycles on one set of batteries.
Military Rated: Safety tested and certified to MIL-STD-461E and MIL-STD-464A.
Operating Temperature: -40°C ~ +85°C
Initiator Power Requirements: 18 - 30VDC, 210 mA for 2 seconds