EOD Gear® • Manufacturing Services • Franklin, Tennessee
CNC Machining as a Service for Defense & Mission-Critical Hardware
Precision CNC mill and lathe machining in metals and engineering plastics including Delrin — prototype through recurring production, performed in-house under an ISO 9001:2015 certified quality system.
Typical Work
From functional prototypes to recurring production runs, EOD Gear machines parts for government, defense prime, and regulated commercial customers.
Every job runs with documented processes, revision control, and traceability under our ISO 9001:2015 certified quality system. The crimpers, cutters, and initiator hardware in the EOD Gear catalog run on these same machines under the same quality system — we hold our customers' parts to the standard we hold our own.
From Drawing to Delivered Part
You don't need a finished production package to start the conversation.
Send Your Part Details
Drawings or models, material callouts, quantities, and timeline — via Add to Quote or email.
Formal Quote & Data Handling
We respond with a formal quote and flag any export-control handling requirements up front, so your data moves correctly from the first file transfer.
Machined In-House
Parts are milled and turned at our Franklin, TN facility with documented processes and traceability.
Prototype to Production
Once the part is proven, revision control supports low-rate and recurring production on the same machines.
Compliance Environment
Qualified for Controlled Technical Data
EOD Gear is qualified to receive, store, and manufacture from controlled technical data — a requirement many machine shops can't meet.
- ITAR-registered facility
- CMMC Level 2 cybersecurity compliance
- Active DD Form 2345 with Enhanced JPC
- ISO 9001:2015 certified quality system
- ATF FFL Type 10 manufacturer
- ATF FEL Type 20 explosives licensee
Procurement
Built for Government Purchasing
Our contract vehicles and certifications support government, defense prime, subcontractor, and regulated commercial procurement.
- GSA Schedule — GS-07F-148GA
- SBA-certified SDVOSB
- Government purchase orders & P-Cards
- Defense prime & subcontractor requirements
- Prototype through repeat-production support
- Machining, foam, kitting & complete solutions from one supplier
Frequently Asked Questions
What CNC machining services does EOD Gear offer?
EOD Gear provides precision CNC mill and lathe machining in metals and engineering plastics including Delrin, performed in-house at our Franklin, Tennessee facility. Work ranges from functional prototypes and design iterations to low-rate and recurring production runs.
Can you machine parts from our drawings or models?
Yes. Send drawings or models, material callouts, quantities, and timeline via Add to Quote or to govsales@EOD-gear.com. We also build replacement or improvement parts from customer drawings.
Can EOD Gear handle ITAR-controlled technical data?
Yes. EOD Gear is an ITAR-registered facility with CMMC Level 2 compliance and an active DD Form 2345 with Enhanced JPC — qualified to receive, store, and manufacture from controlled technical data. We flag any export-control handling requirements up front so your data moves correctly from the first file transfer.
Do you support prototypes and small quantities?
Yes. EOD Gear machines functional prototypes and design iterations, and supports machined transitions from additive prototypes. Once a part is proven, we can carry it into low-rate and recurring production under revision control.
What quality system covers CNC machining work?
All machining runs under EOD Gear's ISO 9001:2015 certified quality system with documented processes, revision control, and traceability. The crimpers, cutters, and initiator hardware in the EOD Gear catalog are produced on these same machines under the same system.
Can government agencies purchase CNC machining services?
Yes. EOD Gear holds GSA contract GS-07F-148GA and is an SBA-certified SDVOSB. Government purchase orders and P-Cards are welcome, and our credentials support defense prime, subcontractor, and regulated commercial procurement.
How do I request a CNC machining quote?
Use Add to Quote with your part details, or email drawings or models, material callouts, quantities, and timeline to govsales@EOD-gear.com. We respond with a formal quote and flag any export-control handling requirements up front.
About EOD Gear
EOD GEAR®
A U.S. defense manufacturer based in Franklin, Tennessee, providing mission-focused equipment, manufacturing, kitting and custom solutions to military, federal, law-enforcement and defense-industry customers.
Our ISO 9001:2015 certified quality system, GSA Schedule, CMMC Level 2 cybersecurity compliance, ITAR registration, and ATF FFL Type 10 / FEL Type 20 credentials allow EOD Gear to support requirements from a single prototype to repeatable production for larger defense programs.
We don't just supply the EOD community — we manufacture for it, on the same machines that build our own catalog.
Send Us the Part
Click Add to Quote above and include:
- Drawings or models
- Material callouts
- Quantities required
- Required timeline
- Any export-control or program requirements
Prefer email? Send everything to govsales@EOD-gear.com and we'll respond with a formal quote.
Need Parts Machined? Send the Drawing.
One prototype, a design iteration, or a recurring production run — EOD Gear machines it in-house under ISO 9001:2015.
Use Add to Quote above, call (938) 336-3639 or email govsales@EOD-gear.com
Add to Quote to Start Your Project
