A holster is the one piece of kit that has to fit three things at once: the pistol, the light or optic hanging off it, and the body carrying it. Get any of the three wrong and the rig gets left in a locker. This page lets EOD technicians, bomb squad personnel, SWAT operators and federal agents build a Kydex holster to their exact pistol and light combination rather than buying the closest thing on a shelf.
Every holster is cut from 0.093" Kydex and made in the United States. Retention is passive and adjustable, so the draw stays consistent as the rig breaks in.
PAIR IT WITH A BELT — SHOP THE BERRY COMPLIANT SPEED BELT
Build Your Holster
Use the configurator below to select your pistol, weapon light, optic and carry configuration. The build updates as you go, so what you see is what ships.
Holster ConfiguratorConfigurator loads here.
Features
- Built to your pistol and light. The shell is moulded to a specific pistol and weapon-light combination, not a generic footprint, so there is no rattle and no dead space.
- 0.093" Kydex. Thick enough to hold its shape under a belt and through a vehicle seat, thin enough to conceal.
- Adjustable passive retention. Retention is set with hardware rather than a release, so the draw is the same every time and there is nothing extra to defeat under stress.
- Optic compatible. Cut to clear a mounted red dot, provided the optic does not overhang the ejection port.
- Adjustable cant. Draw angle adjusts from -5 to +10 degrees on outside-the-waistband builds by repositioning the forward belt loop.
- Belt compatible to 1.75". Fits 1.5" and 1.75" duty and EDC belts.
- Modular attachments. Appendix builds accept a spare pistol magazine, rifle or SMG magazine, tourniquet, handcuffs or a suppressor carrier alongside the pistol.
- Made in the USA. Manufactured in Centerville, Tennessee.
- Lifetime warranty. Breakage under normal use is repaired or replaced.
Specifications
| Manufacturer | T.REX ARMS |
| Type | Custom-configured Kydex pistol holster, inside or outside the waistband |
| Shell material | 0.093" Kydex |
| Hardware | Black oxide coated stainless steel post hardware |
| Clips | Injection moulded polymer, or heat-treated C1050 spring steel with powder coat |
| Retention | Passive and adjustable, set by hardware tension |
| Cant adjustment | -5 to +10 degrees on outside-the-waistband configurations |
| Belt compatibility | 1.5" and 1.75" |
| Optic | Compatible where the optic does not overhang the ejection port |
| Weapon light | Light-bearing and non-light-bearing configurations available |
| Country of origin | United States — Centerville, Tennessee |
| Lead time | Typically 1 to 5 business days to ship |
| Warranty | Lifetime against breakage under normal use |
Getting the Fit Right
Four answers decide the build. Have them ready before you open the configurator.
- Pistol, including generation. Frame generations are not interchangeable. A shell cut for one generation will not reliably fit another, and a Glock 9mm or .40 shell does not fit an aftermarket frame.
- Weapon light, exact model. The light drives the shell geometry more than the pistol does. A holster cut for one light will not take another of similar size.
- Optic, if mounted. Most red dots clear. The constraint is overhang past the ejection port, not height.
- Carry position. Appendix inside the waistband, 4 o'clock inside the waistband, or outside the waistband on a duty or range belt. This sets the body style and the attachment options.
If your pistol and light combination is not in the configurator, send it to us. Not every combination is listed, and some are built to order.
What Ships With It
The holster in the configuration you select, with the clip or belt attachment chosen during the build and the retention hardware installed. Belts, magazines, lights and optics are separate line items.
Agency and Unit Procurement
EOD Gear is a GSA contract holder, an SBA Certified Service-Disabled Veteran-Owned Small Business, ISO 9001:2015 certified, ITAR registered and CMMC2 compliant. We accept GSA orders, purchase orders, P-cards and credit cards.
For a unit buy, send the pistol and light breakdown across the team and we will quote the whole order with one lead time. Agency pricing is available on request — contact us before placing a large order individually.
Common Questions
Will a holster cut for my pistol fit the same pistol with a light?
No. A light-bearing holster and a non-light-bearing holster are different shells. The light sets the geometry below the trigger guard, so the two are not interchangeable. Select the exact light in the configurator.
Does a red dot change which holster I need?
Usually not. The shell is cut to clear a mounted optic. The one limit is an optic that overhangs the ejection port, which fouls the holster mouth. If you are running something unusually long, ask before ordering.
Can I adjust how tight the holster holds the pistol?
Yes. Retention is passive and set by hardware tension rather than a release lever. Tighten or loosen the retention hardware until the draw is consistent. There is no button or lever to defeat under stress.
Is this a duty holster with active retention?
No. These are passive-retention holsters. If your agency policy requires Level II or Level III active retention for uniformed duty carry, you need a locking holster instead. Tell us the policy requirement and we will point you at one.
How long does a custom holster take?
Typically one to five business days to ship. Unusual pistol and light combinations can take longer because they are built to order. If you have a deadline, say so on the order and we will confirm before it goes into production.
Order or Request a Quote
Build your configuration above and add it to the cart. For unit quantities, agency pricing or a combination that is not listed, contact us directly.
Or email govsales@eod-gear.com · (938) 336-3639