EOD Gear Access Hook & Line Kit — 21-Piece IEDD/EOD Remote Access System
The EOD Gear Access Hook & Line Kit is a 21-component remote-access system built for Explosive Ordnance Disposal (EOD) and Improvised Explosive Device Disposal (IEDD) operators who need to remotely actuate door knobs, handles, levers, and push-button locks. Housed in a corrosion-resistant heavy-duty case, it's purpose-built for gaining entry through doors and fixed access points without direct manual contact.
The Access Hook & Line Kit focuses on one job: remote door and access-point actuation. Where the Large, Lite, and Backpack kits cover general hook-and-line rigging, this kit is purpose-built with a dedicated set of actuators — finger pull, push button, handle/grip lifter, door knob turner, and door lever lifter — plus a full range of spring clamps (C1 through C9) for gripping and manipulating hardware from a standoff distance.
Each spring clamp pairs with the included clamp screws for secure attachment to door hardware, handles, or knobs, allowing operators to turn, pull, or push access mechanisms remotely. An interior hood release tool extends this capability to vehicle interiors as well.
Manufacturer Authority & Compliance
EOD Gear is a U.S.-based manufacturer of explosive ordnance disposal (EOD) and improvised explosive device disposal (IEDD) equipment, with 14 years of past performance supplying government, military, and law enforcement agencies worldwide since 2012.
- ISO 9001:2015 Certified Manufacturing — quality management systems certified to the ISO 9001:2015 standard by DQS, ensuring consistent, repeatable manufacturing quality.
- ITAR Registered Manufacturer — registered with the U.S. Department of State under the International Traffic in Arms Regulations, Manufacturer Registration #M39053 and Broker Registration #K-6636.
- GSA Contract Holder — approved federal supply schedule contractor under GSA Contract #GS-07F-148GA.
- SDVOSB Certified — Service-Disabled Veteran-Owned Small Business, certified by the U.S. Small Business Administration.
- CMMC2 Compliant — aligned with Cybersecurity Maturity Model Certification Level 2 requirements for handling controlled defense information.
- 14 Years Past Performance — continuous supply of EOD/IEDD tools and equipment to U.S. and allied government, military, and public safety agencies since 2012.
Full certification documentation, past performance references, and compliance records are available upon request to support institutional and international procurement due diligence, including UN and allied government tenders.
Key Features:
- 21 mission-ready components in one corrosion-resistant heavy-duty case
- Dedicated actuator set: Finger Pull, Push Button, Handle/Grip Lifter, Door Knob Turner, Door Lever Lifter
- Full Spring Clamp range (C1–C9) for gripping door hardware and handles
- Interior Hood Release tool for vehicle access tasks
- Clamp Screws (Long and Short) for secure hardware attachment
- Includes user manual
Best Suited For
EOD/IEDD units and bomb squads who need dedicated remote actuation capability for doors, handles, knobs, and vehicle interior access points, as a focused complement to a general hook-and-line rigging kit.
Full Kit Contents (21 Components)
| # | Component | Qty |
|---|---|---|
| 1 | Finger Pull Actuator | 1 |
| 2 | 3 Function Door Wedge | 1 |
| 3 | Handle/Grip Lifter | 1 |
| 4 | Push Button Actuator | 1 |
| 5 | Door Knob Turner | 1 |
| 6 | Door Lever Lifter | 1 |
| 7 | Spring Clamp, C1 | 1 |
| 8 | Spring Clamp, C2 | 1 |
| 9 | Spring Clamp, C3 | 1 |
| 10 | Spring Clamp, C4 | 1 |
| 11 | Spring Clamp, C5 | 1 |
| 12 | Spring Clamp, C6 | 1 |
| 13 | Spring Clamp, C7 | 1 |
| 14 | Spring Clamp, C8 | 1 |
| 15 | Spring Clamp, C9 | 1 |
| 16 | Interior Hood Release | 1 |
| 17 | Clamp Screw, Long | 6 |
| 18 | Clamp Screw, Short | 2 |
| 19 | Clamp Screw, Short | 1 |
| 20 | Heavy Duty Case with Foam | 1 |
| 21 | User Manual | 1 |
All components are corrosion-resistant and field-rated. Set is stored in a heavy-duty carrying case with custom foam insert.
FAQs
Q: What's the difference between the Access Kit and the other EOD Gear hook and line kits?
A: The Access Kit is purpose-built for remote door and hardware actuation — door knobs, handles, levers, and push-button locks — using a dedicated set of spring clamps and actuators, rather than the general rigging hooks, lines, and pulleys found in the Large, Lite, and Backpack kits.
Q: What is a hook and line kit used for in EOD/IEDD operations?
A: A hook and line kit lets EOD/IEDD technicians remotely open doors, vehicles, or containers and move suspect items from a safe standoff distance, using hooks, pulleys, lines, and anchors instead of manual contact.
Q: What's included in the EOD Gear Access Hook & Line Kit?
A: 21 components including 5 dedicated actuators, a full C1–C9 spring clamp set, an interior hood release tool, clamp screws, and a heavy-duty corrosion-resistant case.
Q: Can this kit be used alongside the Large or Lite hook and line kits?
A: Yes — the Access Kit is designed as a focused complement to general rigging kits, adding dedicated door and handle actuation capability operators can pair with a Large, Lite, or Backpack kit as needed.
Q: Does the kit include documentation for training or procurement?
A: Yes, a user manual is included with every kit.
Q: How do I get pricing for the EOD Gear Access Hook & Line Kit?
A: Pricing is provided on request. Contact EOD Gear directly for a quote.
