The Warrior Assault Systems X300 is an outstanding medium to long range Patrol Pack and has approximately 80 liters or 4880 cubic inch capacity!
The X300 was designed with specific input from SF units with a requirement for a strong yet light weight versatile pack which allowed for compartmentalized storage with top and middle opening and exceptional comfort. The requirement was for features such as removable padded belt system, variable height Harness adjustment, 5 external storage pouches with large main compartment. Narrow design allows for efficient movement in a wide variety of environments ( excellent in Urban Environments, Narrow Streets, Door Ways, Houses etc ).
The X300 has 3 x Man Down handles ( 1 x Top Center 1 x left side, 1 x right side ) which allows for 2 man rapid extraction of casualty.
Access is via a Helmet friendly Top Opening lid with Claymore Style heavy duty zipped pouch on top side, also features map style pocket on the inside. Additional access is via the large reinforced center pocket, this features a heavy duty size 10 sealed seam zip which opens into a medium sized quick access pocket, ( the flap opens top to bottom ) this main external pocket is lined with a heavy duty air mesh fabric which has a similar zip which opens ( bottom to top ) allowing convenient access to the middle and bottom of the pack.
Large MOLLE pouches run down both sides with internal compartments and pockets for storage. Also features a lower horizontal pouch and the underneath of the pack accommodates a final zip compartment with removable liner bag for separate storage of wet items of clothing etc in dedicated compartment.
The entire pack is covered in 1" Inch MOLLE Webbing which allows the attachment of various pouches to increase carrying capacity.
23" x 11.5" x 8.5" (600mm x 300mm x 220mm)
No 1 Outer Compartment
2" x 11.5" x 10" (50mm x 30mm x 260mm)
No 2 Outer Compartment
14.5" x 10" x 2" (370mm x 260mm x 60mm)
No 3 Outer Compartment
1" x 11.5" x 4.5" (30mm x 300mm x 120mm)
All our Fabrics, Webbing, Plastic Hardware and Threads are treated at source to deliver the lowest I.R. Signature possible.